4 Sierra Tango Building and flying Van's RV-7 N834ST
Electrical

May 18, 2006

2 hours logged

Tonight, I continued with wiring inside the fuselage. I threaded the Com 2 antenna cable through the spar, and took it up to the radio stack. I still need to add the plug and connect it too the radio though.

I also sorted out the marker beacon antenna wiring. This runs into the back of the SL-15 audio panel. It’s tough to see in this shot, but it’s the copper coloured cable to the right of the white ones.

I started threading the auto pilot cable through from the wing servo too. The reason I’ve moved into the cabin is because I need to square away all my wiring in there so I can fit the centre console for good. This has to be in place to start the engine on Memorial Day weekend.