https://www.4sierratango.com/build/empennage/Recent content in Empennage on 4 Sierra TangoHugoen-USSun, 17 Jul 2005 00:00:00 -0400https://www.4sierratango.com/build/empennage/building-the-empennage/Mon, 06 Sep 2004 00:00:00 -0400https://www.4sierratango.com/build/empennage/building-the-empennage/Dave and I started actually working on this in February 2002. We spent quite some time ‘pounding wood’ as Mike put it, making our 12’ x 4’ worktable. Having…https://www.4sierratango.com/build/empennage/2004-09-06/Mon, 06 Sep 2004 00:00:00 -0400https://www.4sierratango.com/build/empennage/2004-09-06/I finally got to mounting the empennage today too. This is the final time. I put a dobbin of RTV on the end of the ELT antenna so it sticks in the vertical s…https://www.4sierratango.com/build/empennage/2004-09-07/Tue, 07 Sep 2004 00:00:00 -0400https://www.4sierratango.com/build/empennage/2004-09-07/Stopped by tonight on the way home and mounted the rudder. Looking good!https://www.4sierratango.com/build/empennage/2004-09-09/Thu, 09 Sep 2004 00:00:00 -0400https://www.4sierratango.com/build/empennage/2004-09-09/Tonight I starting doig the rudder stops. I had one already made, which was attached to the fuse with clecos, and still had the other to do. That was about 1…https://www.4sierratango.com/build/empennage/2004-10-10/Sun, 10 Oct 2004 00:00:00 -0400https://www.4sierratango.com/build/empennage/2004-10-10/Today I carried on where I left off last time I was here and finished up the rudder installation. This included making the right side rudder stop. After maki…https://www.4sierratango.com/build/empennage/2005-07-17/Sun, 17 Jul 2005 00:00:00 -0400https://www.4sierratango.com/build/empennage/2005-07-17/I lifted up the tail of the plane and put it on a saw horse so I could wrap up everything at the tail end. I finished the wiring for the Nav light. I had don…